Download Print this page

NEC LCD1711M Service Manual page 34

Hide thumbs Also See for LCD1711M:

Table of Contents

5 Disassembly of Main Board and all wires

Unscrew the two screws to remove the Bracket (Figure 19), unplug all connectors

unscrew the four hex screws of Main Board and the four screws to remove the Main

Board.(Figure 20)

Unscrew the four screws and remove Support Bracket.(Figure 20)

Figure 19

Tear off the tape and unplug the interface cable (Figure 21) tear off the tape to take off

cables. (Figure 22).Unplug all wires from Support Bracket. (Figure 23)

Support Bracket

Figure 22

Figure 23

Figure 20

Figure 21

Table of Contents

Show Quick Links

Table of Contents