Table of Contents
Advertisement
Ventilator monitoring information
Ventilator monitoring information shows the current operating mode and setting. In case of
communication error or expansion kit error, other information except for the alarm is not displayed.
<Ventilator condition screen>
The information shown on the Ventilator monitoring tab and Ventilator condition screen is as follows.
Item
Mode
User mode
Filter exchange
Lock
Alarm
Fan level
<Ventilator monitoring tab>
Operating mode of the ventilator is displayed.
• Heat: Ventilate both inlet/outlet through heat exchanger
• Normal: Ventilate air to outlet without passing through heat exchanger
• Auto: Control the inlet/outlet automatically by measuring the indoor and
outdoor temperature
Additional operating method of ventilator is displayed.
• Humid : Condition with Humidify function set (only for Eco V DX )
• Heater : Condition with heater function set
• Power save : Condition with power save function set
• Speed : Condition with speed function set
When it is time to exchange the filter of the ventilator, filter exchange icon is
displayed.
Lock function setting to disable all functions of the ventilator through the
remote controller by the user is displayed.
• Enabled: Condition with lock function enabled
• Disabled: Condition with lock function disabled
When there is no alarm in the current ventilator, this is displayed as ʻ0ʼ. In
case of an alarm, the applicable alarm code is displayed.
Current fan level is displayed.
When you press the [View detail] button, the
ʻVentilator conditionʼ screen showing the detail
information of the applicable ventilator will be
displayed, as shown on the left side.
In the ʻVentilator conditionʼ screen, you can check
the detail condition of the ventilator.
Description
Installation/Owner's Manual
4. AC Smart II Menu
4-10
Hide quick links:
Advertisement
Table of Contents
