Table of Contents
Advertisement
OPERATION
18
NOTE
• The stepping motor may be broken, if the up-
down vane opens rapidly.
• The fan speed is set to high by default.
• Features may change depending on the model
type.
• The temperature cannot be altered when using
the Power button
a
• For Cooling only models, the temperature is set
to 22
7
by default.
• For Cooling and Heating models, the
temperature is set between 22
default.
Restoring the Previous Settings
When the air conditioner is turned on again after a
power failure, the Auto Start function restores the
previous settings.
When using the appliance for the first time, the
Auto Restart function is set. You can cancel and set
this function by pressing the Power button
the indoor unit.
Cancelling Auto Restart
1
Open the up-down vane.
2
Press and hold the Power button
seconds.
3
When the appliance beeps twice, release the
Power button
. The lamp will flash twice. This
a
repeats 4 times.
Setting Auto Restart
1
Open the up-down vane.
2
Press and hold the Power button
seconds.
.
and 24
7
7
a
for 6
a
for 6
a
3
When the appliance beeps twice, release the
Power button
repeats 4 times.
NOTE
• The feature may change depending on the
by
model type.
• If you press and hold the Power button
– 5 seconds, instead of 6 seconds, the appliance
will switch to the test operation. In the test
operation, the appliance blows out strong
cooling air for 18 minutes and then returns to
factory default settings.
Preparing before
on
Operation
Inserting the Batteries into the
Wireless Remote Control
Insert AAA (1.5 V) batteries into the wireless remote
control.
1
Remove the battery cover and insert the new
batteries, making sure that the + and –
terminals of the batteries are oriented
correctly.
. The lamp will flash. This
a
for 3
a
Advertisement
Table of Contents
