LG 65LX570H Service Manual page 13
Hide thumbs
Also See for 65LX570H:
- Commercial mode setup manual (71 pages) ,
- Owner's manual (44 pages)
Advertisement
5.2.3. Tool Option Inspection
- Method : Press Adj. key on the Adj. R/C, then select Tool
option.
Model
1
28LX570H-UA
7173
1331
32LX570H-UA
679
1075
32LX560H-UA
679
1075
40LX570H-UA
1706
3123
40LX560H-UA
1706
3123
43LX570H-UA
684
3123
43LX560H-UA
684
3123
49LX570H-UA
686
3123
49LX560H-UA
686
3123
55LX570H-UA
688
3123
65LX570H-UA
8882
3123
Commercial Tool Option : 3
5.3. Ship-out mode check (In-stop)
▪ After final inspection, press In-Stop key of the Adj. R/C and
check that the unit goes to Stand-by mode.
Copyright ©
LG Electronics. Inc. All rights reserved.
Only for training and service purposes
Tool option
2
3
4
5
43584
8736
531
43456
8736
1555
43456
9760
1555
43712
8736
531
43712
9760
531
43584
8736
1555
43584
9760
1555
43584
8736
1555
43584
9760
1555
43584
8736
1555
43840
8736
3603
6. GND and HI-POT Test
6.1. GND & HI-POT auto-check preparation
(1) Check the POWER CABLE and SIGNAL CABE insertion
condition.
6
6.2. GND & HI-POT auto-check
265
(1) Pallet moves in the station.(POWER CORD / AV CORD is
267
tightly inserted)
267
(2) Connect the AV JACK Tester.
(3) Controller (GWS103-4) on.
265
(4) GND Test (Auto)
265
- If Test is failed, Buzzer operates.
- If Test is passed, execute next process(Hi-pot test).
265
(Remove A/V CORD from A/V JACK BOX)
265
(5) HI-POT test (Auto)
265
- If Test is failed, Buzzer operates.
- If Test is passed, GOOD Lamp on and move to next
265
process automatically.
265
265
6.3. Checkpoint
(1) Test voltage
1) 3 Poles
- GND: 1.5 KV/min at 100 mA
- SIGNAL: 3 KV/min at 100 mA
2) 2 Poles
- SIGNAL: 3 KV/min at 100 mA
(2) TEST time: 1 second
(3) TEST POINT
1) 3 Poles
- GND Test = POWER CORD GND and SIGNAL
CABLE GND.
- Hi-pot Test = POWER CORD GND and LIVE & NEUTRAL.
2) 2 Poles
- Hi-pot Test = Accessible Metal and LIVE & NEUTRAL.
(4) LEAKAGE CURRENT: At 0.5 mArms
7. Audio
7.1. Audio input condition
(1) RF input: Mono, 1KHz sine wave signal, 100% Modulation
(2) CVBS, Component: 1KHz sine wave signal (0.4Vrms)
(3) RGB PC: 1KHz sine wave signal (0.7Vrms)
7.2. Specification
Item
Min
9.0
Audio practical
4.5
max Output,
L/R
8.5
(Distortion=10%
max Output)
4.25
Speaker
(8Ω Impedance)
* Measurement condition:
(1) RF input: Mono, 1KHz sine wave signal, 100% Modulation
(2) CVBS, Component: 1KHz sine wave signal 0.4Vrms
(3) RGB PC: 1KHz sine wave signal 0.7Vrms
- 13 -
Typ
Max
Unit
10.0
12
W
Measurement
5
6
W
condition
EQ Off
8.9
9.8
Vrms
AVL Off
Clear Voice Off
4.65
4.9
Vrms
10.0
14.0
W
Measurement
condition
EQ On
5
7
W
AVL On
Clear Voice On
LGE Internal Use Only
Remark
DRC operation
under 12W
(LX series)
Only for
28LX570H-UA
(LX series)
Only for
28LX570H-UA
Advertisement
