Table of Contents
Advertisement
ARCHITECTURAL APPEAL
Convergence of Technological Innovation with Flexibility and Style
Benefits of Single Zone
Wall Mounted Art Cool Premier System
• Available in 9,000, 12,000, 15,000, 18,000,
and 24,000 Btu/h
• Inverter technology
• All-season use - heat pump models for both
cooling and heating capabilities
• Operating range for outdoor units of 14°F to
118°F (DB) in cooling and -13°F to 65°F (WB)
in heating
• Operating range for indoor units of 53°F to
75°F (WB) in cooling and 60°F to 86°F (DB)
in heating
• Quiet operation inside and outside
• Duct-free split system
6 | INTRODUCTION
Single Zone Wall
Mounted Art Cool
Premier Systems
Choosing an LG Single Zone Wall Mount-
ed Art Cool Premier product provides a
system designer an edge to engineer
a system with individual control, and
design flexibility with advanced controls.
These single-zone systems are avail-
able in a nominal capacities of 3/4 to 2
tons. These are best suited for applica-
tions with zones that require heating or
cooling, such as residential, and small
business office buildings. Single Zone
Wall Mounted Art Cool Premier out-
door and indoor units are available in
208–230V/60Hz/1Ph.
Adaptable and Flexible
Single zone wall mounted split systems
allow cooling or heating for the entire
residence or just a single room without
the need for invasive ductwork. There is
minimal renovation needed.
Long refrigerant piping lengths allow
for extra design flexibility in indoor unit
installation.
These units may be used for a number of
residential or commercial environments
such as:
• Older homes
• New home construction
• Office buildings
• Restaurants
• Hospitals / Medical facilities
• Schools
• Nursing homes
• Retail establishments
• House of worship
Due to our policy of continuous product innovation, some specifications may change without notification.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG " is a registered trademark of LG Corp.
Inverter Technology
Inverter variable-speed duct-free split
systems are measurably quieter and
consume less energy than conventional
air conditioners. The inverter compressor
ramps up or down to match the required
room capacity and maintain the comfort
level. When the selected temperature
is reached, the inverter compressor
operates at low speed to maintain that
comfort level, thereby using less energy.
Advertisement
Table of Contents
