Table of Contents
Advertisement
Remote controller installation
Since the room temperature sensor is in the remote controller, the remote controller box
should be installed in a place away from direct sunlight, high humidity and direct supply of
cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m)
above the floor in an area with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by:
- Drafts, or dead spots behind doors and in corners.
- Hot or cold air from ducts.
- Radiant heat from sun or appliances.
- Concealed pipes and chimneys.
- Uncontrolled areas such as an outside wall behind the remote controller.
- This remote controller is equipped with LCD display. For proper display of the remote
controller LCD's, the remote controller should be installed properly as shown in Fig. 2.
(The standard height is 4ft~5ft(1.2m~1.5m) from floor level.)
FAN
SPEED
TEMP
OPER
MODE
no
Direct
Sun ray contact area
yes
FAN
SPEED
TEMP
OPER
MODE
no
FAN
SPEED
TEMP
OPER
MODE
5feet
(1.5meters)
Fig. 2.
Installation instruction
FAN
SPEED
TEMP
OPER
MODE
no
Owner's & Installation Manual 9
Advertisement
Table of Contents
