Operation Tips
Control of On/Off operation
Individual Operation
1. Press the individual On/Off button, then the equivalent
unit starts and LED is on.
2. If pressing the individual On/Off button, equivalent unit
stops and LED is off.
Total Control for Each Group
• Press Total On button, then all units of that group
operate sequently and LED is on.
• Press Total Off button, then each group units stop
sequently and LED is off.
Total On/Off Operation (master & slave combination)
1. Press Total On button for more than 2sec, then all
linked units start sequentially and their LEDs turn
on.
2. Press Total Off button for more than 2sec, then all
linked units stop sequentially and their LEDs turn
off.
Operation Tips
Owner's Manual 7