Table of Contents
Advertisement
DEINTERLACE
Selects the IP (Interlace to Progressive) conversion function.
Note: For DVI input "DVI-HD" needs to be enabled in the DVI mode menu.
ON
Converts interlaced signals to progressive. This is the default setting.
OFF
Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of
image retention.
COLOR SYSTEM
The selected Color System depends on the video format of the input signal.
VIDEO, S-VIDEO inputs only
AUTO
Automatically chooses Color System setting based on input signal.
NTSC
PAL
SECAM
4.43 NTSC
PAL-60
OVER SCAN
Some video formats may require different scanning modes in order to best display the image.
HDMI, DVD/HD, SCART, VIDEO, S-VIDEO
inputs only
ON
Image size is larger than what can be displayed. The image edge will appear cropped.
Approximately 95% of the image will be shown on the screen.
OFF
Image size stays within the display area. The whole image is displayed on the screen.
NOTE: When you use a computer with HDMI out, please set "OFF".
OPTION SETTING
You can set this setting when option board accessory is connected to the monitor.
Please contact your supplier for detailed information about Option board slot accessories.
OPTION POWER
Allow the monitor to supply power to Option board slot during power save mode or standby
mode.
NOTE: If an option board slot that requires constant power supply is connected to the monitor,
RESPONSE IMPROVE is not available. In this case, please remove the option board slot from
the monitor. RESPONSE IMPROVE will be available.
AUDIO
The function is available for slot 2 type PC. Selects sound input signal. To activate DIGITAL,
select OPTION(D) for input signal and OPTION for AUDIO INPUT.
NOTE: DIGITAL is activated only when OPTION(D) is selected for input signal and OPTION for
AUDIO INPUT.
INTERNAL PC
The function is available for slot 2 type PC.
OFF WARNING
If OPTION POWER is OFF, a warning message appears when monitor power is turned off.
Note: Warning message does not appear when monitor power is turned off by OFF TIMER
setting or SCHEDULE setting.
AUTO OFF
Monitor power is automatically "OFF" when connected PC is OFF or the monitor is in power save
mode.
Note: Monitor power is not automatically "ON" when connected PC is ON.
START UP PC
When ON is selected, connected PC start-up.
FORCE QUIT
When ON is selected, it performs force-quit PC.
120Hz
(not adjustable)
RESPONSE IMPROVE
Response Improve may reduce blurring that occurs in some moving images when it is set to
"MODE 1" or "MODE 2".
NOTE: If RESPONSE IMPROVE is set to "MODE 1" or "MODE 2", PIP function is not available.
When changing the setting, power supply to the option board slot will be cut down temporarily
even if OPTION POWER is ON.
If an option board slot that requires constant power supply is connected to the monitor,
RESPONSE IMPROVE is not available. In this case, please remove the option board slot from
the monitor. RESPONSE IMPROVE will be available.
TOUCH PANEL
(not adjustable)
RESET
Resets the following settings within the ADVANCED OPTION menu back to factory setting:
INPUT DETECT (except the priority of input signals), INPUT CHANGE, TERMINAL SETTING,
DEINTERLACE, COLOR SYSTEM, OVER SCAN, AUDIO in OPTION SETTING, START UP PC
in OPTION SETTING and FORCE QUIT in OPTION SETTING.
FACTORY RESET
All items are returned to factory shipment state.
NOTE: You can reset all items in all daisy chain displays. Please be careful to avoid resetting all
items inadvertently.
English-26
ON
AUTO
ON
-
OFF
ANALOG
OFF
OFF
NO
NO
-
MODE 1
-
-
-
Advertisement
Table of Contents
