Advertisement
Installing an Option Board
You can install Option Boards that are compatible with Intel
Display Module Large (Intel
1. Turn off the main power switch.
2. Place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily
support the weight of the monitor.
OTEE:
To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor's
screen area, on the table before laying the monitor face down. Make sure there is nothing on the table that can
damage the monitor.
3. Remove the SLOT COVER a and b , and then the OPTION COVER a (Figure 1).
When using Intel
SDM-L type option board, slide the CENTER RAIL to the right and remove it. Reverse the process to re-
®
attach it (Figure 1-1).
4. Attach the included OPTION COVER b with the removed screws (Figure 2).
OPTION COVER
SLOT COVER
5. Insert the Option Board into the monitor and affix it in place with the removed screws (Figure 2).
(Recommended fasten force: 50 - 80 N•cm).
SDM-L) specifications.
®
Figure 1
Intel
SDM-S
®
Smart Display Module Small (Intel
®
Raspberry Pi Compute Module
Figure 2
English−7
SDM-S) and Intel
Smart
®
®
CENTER RAIL
Figure 1-1
Intel
®
SDM-L
Advertisement
