Page 1
Form No. 3415-680 Rev A Trans Pro 100 Tow-Behind Trailer Model No. 04240—Serial No. 310000001 and Up Installation Instructions Safety Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger.
Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. Trailer bed Tongue assembly Axle hub Wheel assembly Trailer ramp Bolt (3/8 x 2-3/4 inches) Spacer Assemble the trailer. Nylon Locknuts (3/8 inch) Carriage bolts (3/8 x 1 inches) Locknuts (3/8 inch) Lug nuts...
Page 3
Assembling the Trailer 1. Mount the tongue assembly to the mounting bracket on the underside of the trailer bed with 2 bolts (3/8 x 2-3/4 inches), 2 spacers and 2 locknuts. For most applications, use the front set of mounting holes in the tongue and bracket (Figure g012162 Figure 1...
Loading the Trailer 4. Mount the trailer ramp to the rear of the trailer bed with the hinge rod and 2 cotter pins (Figure 1. Unhook the ramp latch from the wheel guide and lower the ramp to ground. Note: Apply a light coating of grease to the 2.
Operation • Use extreme caution and slow speed when backing up the trailer and tow vehicle. • Watch out for traffic when near or crossing roads. Operating Tips Always yield the right of way to pedestrians and other vehicles. • You can use the trailer for the Greensmaster 1000, 1010, 2000, Flex 21, 2100 and eFlex •...
Page 8
Countries Other than the United States or Canada Customers who have purchased Toro products exported from the United States or Canada should contact their Toro Distributor (Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatisfied with your Distributor's service or have difficulty obtaining guarantee information, contact the Toro importer.