Table of Contents
Advertisement
1.48
Daily And Before Use continued
Clean the radiator screen: Clean the radiator
screen. Check the oil cooler and engine radiator
grille for debris and clean as necessary using a
brush or airline. If water is used, these areas should
be allowed to dry out completely before use.
IMPORTANT: PREVENT DAMAGE -
NEVER operate the mower with a damaged
radiator screen or engine damage could result
from overheating. Clean the radiator screen
more regularly in dry conditions.
Check fuel level: Top up as necessary with diesel
fuel. Always top up before storing the mower over-
night to prevent water condensation from contami-
nating the fuel.
Check hydraulic oil level: If the oil level is below
the upper mark on the sight level gauge, top up
with the correct grade of hydraulic oil as necessary,
refer to SPECIFICATIONS.
WARNING: PREVENT DAMAGE - If there
is noticeable hydraulic oil loss, the leakage
source must be rectified before using the mower.
NEVER operate the mower when the hydraulic
oil level is below the bottom mark on the sight
level gauge. NEVER operate the mower with
contaminated oil.
Check hydraulic hose-lines: Inspect hydraulic
hose-lines for signs of wear or damage.
WARNING: PREVENT ACCIDENTS -
ALWAYS replace worn or damaged hydraulic
hose-lines immediately. DO NOT operate the
mower with defective hydraulic hose-lines.
Inspect the mower for signs of oil leakage. Tighten
fittings or replace seals as required.
MAINTENANCE
1
1. Radiator screen
2. Radiator
D
1.48
2
Advertisement
Table of Contents
