LG 43UF7600 Owner's Manual page 24
Hide thumbs
Also See for 43UF7600:
- Owner's manual (38 pages) ,
- Safety and reference (41 pages) ,
- Owner's manual (29 pages)
Table of Contents
Advertisement
6
EXTERNAL CONTROL DEVICE SETUP
Transmission
/ Receiving
Protocol
[Commandl][Command2][
][Set ID][ ][Data][Cr]
[Command 1]
[Command 2]
[Set ID]
[DATA]
[Cr]
[]
First command to control the TV. (j, k, m or x)
Second command to control the TV.
You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to '0', every connected set
can be controlled.
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on
transmission/receiving
protocol.
To transmit command data (hexadecimal).
Transmit 'FF' data to read status of command.
Carriage Return - ASCII code '0x0D'
Space - ASCII code '0x20'
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement)
based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement)
based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data 00: Illegal Code
* When you enter the [data] in hexadecimal,
refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0
32 : Step 50 (Set ID 50)
FE : Step 254
01 : Step 1 (Set ID 1)
33 : Step 51 (Set ID 51)
FF : Step 255
0A: Step 10 (Set ID 10)
63 : Step 99 (Set ID 99)
01 00 : Step 256
OF : Step 15 (Set ID 15)
C7 : Step 199
27 0E : Step 9998
10 : Step 16 (Set ID 16)
C8 : Step 200
27 OF : Step 9999
Hide quick links:
Advertisement
Table of Contents
